Table of Contents
Advertisement
1
▸ Release the
▸ Hold the charge card to the card reader.
The charge authorization code on the card is not checked.
▸ Remove the charge card.
– Tariff appliance 1
▸ To change the tariff, touch the
– The text in the display changes after about 5 seconds.
– The setting is saved.
– Tariff appliance 2
The other settings (amount charged and language) can be changed in exactly the same
way.
xxxx xxxxx
–
End
–
The appliance continues after 3 seconds. The next setting can be made.
Please select appliance
–
3.12
Using the totaliser card
The procedure described below is explained on the basis of model 82A.
▸ Briefly press the
Please select appliance
– ...
– Hold the totaliser card to the card reader.
– Total charged
▸ Hold the totaliser card to the card reader while the card is checked.
– After 3 seconds, Press button 1 to delete total appears in the display.
▸ To delete, press the
– Total charged
If the total charged is not to be deleted, remove the totaliser card from the card
reader without pressing the
Remove card
–
▸ Remove the totaliser card from the card reader.
▸ After 3 seconds,
The appliance continues after 3 seconds.
Please select appliance
–
– The above procedure can be carried out again.
Please charge card
button
x.xx appears in the display.
1
x.xx appears in the display.
appears in the display.
appears in the display.
appears in the display.
1
button.
appears in the display and the LEDs flash.
xxxx.xx appears in the display.
1
button.
0.00 appears in the display.
1
appears in the display.
End
appears in the display.
2
or
button.
button.
appears in the display.
3 Operation
13
Advertisement
Table of Contents
