The Manual Starting On The Baqueira Rc Model - GENERGY EZCARAY Instructions For Use Manual

5.4 The manual starting on the BAQUEIRA RC model

1 On the main control panel, check if the emergency stop button is not
pressed. Otherwise, the engine will not start.
2 Disconnect all equipment from generator or ensure that its switch is in the
OFF position. The starting of the generator has to be done without
equipment connected.
3 Turn the start button (DIAL) to the ON position, according to the figure
below:
4 Place the choke to START position, according to the figure below:
Information: If the engine has recently stopped and is still hot, the choke position
procedure may not be necessary. In this case, to start directly, place it in the RUN
position.
59