Pc Interface - Sigma Metalytics PMV Pro PRO Manual

The PMV PRO is capable of using a Windows PC (Windows 7, 8, 10, and 11) as an interface for the
device. You must first install the PC Interface program by downloading it from our website (www.
sigmametalytics.com/pro-pc) and following the included download and installation instructions.
Once the program is successfully downloaded and installed, plug the PRO device into your PC using the
included USB cable.
To install the PRO PC interface:
1. Go to www.sigmametalytics.com/pro-pc and download the PMV PRO Application Installation zip
file.
2. Open the downloaded .zip file with File Explorer. Click into the PMV PRO Folder and double click on
the PMV PRO installation program (.MSI file type).
3. Your computer might show a warning that the .MSI was stopped from running because it might be
dangerous. Click "Learn More" and then "Run Anyway" to install the program.
4. The program will install to the C: drive by default, but you may select a custom folder.
5. You should now be able to find the on your desktop or by searching your installed applications for
"PMV PRO."
6. Connect your PRO to your computer using the included USB cable. Power on your device and run the
PMV PRO program to get started.
7. While using the PRO with the PC interface, the readings will display on both the device's display and
the PC application.

PC Interface

15