Measurement Screen - Sigma Metalytics PMV Pro PRO Manual

The MEASUREMENT screen will display when taking a reading. Below is a basic explanation of each
part of the screen. The screen will not display the diameter, thickness, or weight if weight mode is
turned off. When using a Wand attachment, only the Basic Verification Mode bar will display.
Sample consistent with
selected metal
Caution: confirm other
aspects of sample, like
size, weight, and
markings.
Sample inconsistent
with selected metal
Calculated Diameter
Calculated Sample Area
Precious Metal Weight
Indicates the device is getting a
Blue Arrow
reliable reading.

Measurement Screen

Selected Metal
Indicates the device is getting an
Red Arrow
unreliable reading, treat result
with caution.
10
Battery Indicator
Basic Verification Mode
Thru Verification Mode
Measured Thickness
Total Weight
Indicates the result is off the
Sideways Arrow
scale in specified direction.