Advertisement
SyncMaster 173T/193T/191T plus/153T/174T
Unpacking
Front
Rear
1. Auto button
2. Exit button
Source button
3. MagicBright button MagicBright is a new feature providing optimum viewing environment depending
4. Adjust buttons
5. Menu button
6. Power button
7. Power indicator
Note : See
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods.
Use this button to auto adjustment direct access.
Use this button to Exit the active menu or the OSD.
When push the 'Source' button, then Selects the Video signal while the OSD is
off. (When the Source button is pressed to change the input mode, a message
appears in the center of the screen displaying the current mode -- analog or
digital input signal.)
Note :If you select the Digital mode, you must connect your monitor to the graphic
card with a digital port using the DVI cable.
on the contents of the image you are watching. Currently three different modes
are available: Text, Internet, and Entertain. Each mode has its own pre-
configured brightness value. You can easily select one of three settings by simply
pressing MagicBright control buttons.
These buttons allow you to highlight and adjust items in the menu.
Use this button to open the OSD and activate a highlighted menu item.
Use this button to turn the monitor on and off.
This light glows green during normal operation, and blinks green once as the
monitor saves your adjustments.
PowerSaver
described in the manual for further information regarding power saving functions.
Advertisement
