Advertisement
Removing the base
Connecting Your
Monitor
Installing the
Monitor Driver
Installing VESA
compliant
mounting
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the
3. Remove the two screws and then remove the Stand from the LCD monitor.
Attaching a base
NOTE: This monitor accepts a 100mm x 100mm VESA-compliant mounting interface pad.
1. Rear cover mounting pad
2. Mounting interface pad
Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with
the four screws that came with the arm-type base, wall mount hanger or other base.
screen.
Advertisement
