Table of Contents
Advertisement
Step 3:
Put your ingredients into the feed of the juicing body and
then push them through using the pushing rod (12).
Do not use excessive force on the pushing rod to feed the
ingredients through.
The juicer will stop operating automatically after 20
minutes of continuous operation. However, to prevent
overheating, it is highly recommended use the juicer in
no longer than 10 minute intervals.
If the juicer is used continuously for 20 minutes, wait for 20 to 30 minutes for the motor to
cool down before resuming juicing.
The juicer utilises a current limiting system to prevent damage. The electric current required
to power the motor increases when texturally harder foods are processed. When the current
used goes beyond 1.3A, the juicer will lock itself and the motor will pause for 2 seconds. The
motor will then automatically run in reverse for 5 seconds. During this period, food or pulp
build-up can be removed while the motor runs in reverse. After 5 seconds, the motor will
come to a complete stop. Operation of the juicer can resume after the control dial is turned
back to the "O" position.
Advertisement
Table of Contents
