Kogan KASLMJUBLKA User Manual page 6

ASSEMBLY
Step 1:
Align the juicing body (5) and main body
(2) with the alignment markers (shown
below) set to "Unlocked".
Insert the juicing body onto the main body.
Rotate the juicing body anticlockwise until
the alignment marker is set to "Locked" to
secure the juicing body in place.
Step 2:
Align and insert the narrower end of the
spiral pusher (6) into the side hole of the
juicing body. Push the spiral pusher in until
fully inserted.
You may have to turn the spiral pusher
slightly to align it in place.
The spiral pusher grinds ingredients by
pushing them through the juice strainer.
Step 3:
Attach the larger end of the juice strainer
(7) onto the end of the spiral pusher. The
three grooves on the juice strainer should
align with the three clamping slots on the
juicing body.
The juice strainer is used to grind and filter
the ingredients to separate the juice from
the pulp.