Table of Contents
Advertisement
Touch the On/Off switch .
All symbols light up with reduced
brightness.
Press and hold the delayed shutdown
control until the grease filter
and charcoal filter symbols light
up.
Touch the 2 control.
2 will light up constantly, 3 will flash on
and off.
The ventilation hood will be ready for
connection in the next 2 minutes.
Follow the instructions in the app.
When successfully connected, 2 and 3
will light up constantly.
Exit connection mode on the
ventilation hood by touching the
delayed shutdown control .
The ventilation hood can now be
operated via the app.
Before using for the first time
Connecting via WPS
Your WiFi router must support WPS
(WiFi Protected Setup).
Touch the On/Off switch .
All symbols light up with reduced
brightness.
Press and hold the delayed shutdown
control until the grease filter
and charcoal filter symbols light
up.
Touch the 2 control.
2 will light up constantly, 3 will flash on
and off.
The WiFi connection must be started on
the ventilation hood at the same time as
on the WPS router.
Press the B control on the ventilation
hood after a few seconds.
After a short while, 2 will light up
constantly, and 3 and B will flash on
and off.
The ventilation hood is ready for
connection in the next two minutes.
19
Advertisement
Table of Contents
