Connecting Via Wps - Miele DAS 4940 Operating And Installation Instructions

 Switch the cooker hood off.
 Press and hold the  control.
 Press the lighting control at the same
time .
2 will light up constantly, 3 will flash on
and off.
The cooker hood will be ready for
connection in the next 2 minutes.
 Follow the instructions in the app.
When successfully connected, 2 and 3
will light up constantly.
 Quit connection mode on the cooker
hood by pressing the run-on
control .
The cooker hood can now be operated
via the app.
Before using for the first time

Connecting via WPS

Your WiFi router must support WPS
(WiFi Protected Setup).
 Switch the cooker hood off.
 Press and hold the  control.
 Press the lighting control at the same
time .
2 will light up constantly, 3 will flash on
and off.
The WiFi connection must be started on
the cooker hood at the same time as on
the WiFi router.
 Press the  control on the cooker
hood after a few seconds.
After a short while the 2 will light up
constantly, and the 3 and the B will
flash on and off.
The cooker hood is ready for
connection in the next two minutes.
19