Connecting Via Wps - Miele DAS 4920 Operating And Installation Instructions

If requested to activate Wi-Fi on the
rangehood, proceed as follows:
 Manually switch the rangehood off.
 Press and hold the  control.
 Press the lighting control  at the
same time.
2 will light up constantly, 3 will flash on
and off.
The rangehood is ready for connection
during the next two minutes.
 Follow the instructions in the App.
When successfully connected 2 and 3
will light up constantly.
 Quit connection mode on the
rangehood by pressing the run-on
control .
The rangehood can now be operated
via the App.
Before using for the first time

Connecting via WPS

Your Wi-Fi router must support WPS
(Wi-Fi Protected Setup).
 Manually switch the rangehood off.
 Press and hold the  control.
 Press the lighting control  at the
same time.
2 will light up constantly, 3 will flash on
and off.
The Wi-Fi connection must be started
on the rangehood at the same time as
on the Wi-Fi router.
 Press the  control on the rangehood
after a few seconds.
After a short while 2 will light up
constantly, and 3 and B will flash on
and off.
The rangehood is ready for connection
during the next two minutes.
19