Table of Contents
Advertisement
6 screws, 4 x 15 mm
4 M4 x 16 mm screws
Installation plan
See the installation plan for details of
the individual steps involved in the
installation of this appliance.
Leave these instructions with the
appliance for the consumer/user.
Installation materials for recirculation
mode
You need the following optional
accessories for recirculation mode.
DUU 15x installation kit
contains a directional unit socket,
hose, and hose clips (DUU 150 for the
top of the cabinet or DUU 151 for the
sides or front of the cabinet).
Further installation materials
(optional accessories)
DASL 38 trims
You will need the trims if you wish to
replace an appliance from the DA 35xx
or DA 36xx series with this ventilation
hood and you want to keep using the
existing cabinet. The trims allow you to
adjust the height of the cabinet sides.
DASB 90 filler panel
You can use the filler panel on the rear
of the ventilation hood to level out the
height in relation to a backsplash, for
example. The filler panel can also be
mounted with the spacer strip.
Installation
35
Advertisement
Table of Contents
