Table of Contents
Advertisement
Changing settings
All settings are made with the
ventilation hood switched off.
Pull out the deflector plate and switch
off the blower and the lighting.
Adjusting the grease filter filter
saturation indicator
The filter saturation indicator can be set
to suit the customer's cooking habits.
The factory default setting is a cleaning
interval of 30 hours.
- Select a shorter interval of 20 hours if
food is fried regularly.
- A shorter cleaning interval is also
recommended if the customer only
cooks occasionally. This will prevent
grease buildup from hardening and
making cleaning more difficult.
- Select a longer cleaning interval of 40
or 50 hours if the customer uses very
little fat when cooking.
24
Touch the On/Off switch .
All symbols light up with reduced
brightness.
Press and hold the delayed shutdown
control until the grease filter
and charcoal filter symbols light
up.
Touch the grease filter symbol .
The grease filter symbol and one of
the blower power level indicators will
flash.
The indicators 1 to B show the current
time setting:
1............................................... 20 hours
2............................................... 30 hours
3............................................... 40 hours
B .............................................. 50 hours
Touch the relevant digits to select the
desired duration.
Confirm your choice by touching the
grease filter control . If the
selection is not confirmed within
4 minutes, the system will revert to
the previous setting.
Advertisement
Table of Contents
