Table of Contents
Advertisement
11
Temperature Alarm (IR
Camera)
11.1 Alarms Overview
For the IR camera, the VS80 offers a high (above) and a low (below) alarm
function; only one can be selected at a time.
11.2 Configuring the Alarms
1. Tap the color palette touch-screen icon
2. Tap the Above alarm icon
3. The temperature set point will appear at the centre left area of the monitor
(as shown in Figure 11.1 as 77.1°).
4. Tap and drag the color temperature bar graph up or down to change the
set point. The bar graph is located on the left side of the display, as shown
in Figure 11.1, below).
11.3 Alarm Trigger Indication
In the Above alarm mode, a red color is applied to all parts of the image that
represent a temperature above the alarm set point. Some further adjustment
to the set point may be necessary to achieve the proper contrast. Tap and
drag on the color bar graph to change the set point.
Figure 11.1 Above Alarm display
#NAS100101; r. AB/85156/85156; en-US
.
or the Below alarm icon
.
32
Advertisement
Table of Contents
