Wi-Fi Menu; Display Grid (Visual Cameras Only); Timestamp; External Microphone - FLIR VS80 User Manual

8
Settings Menu

8.2.3 Wi-Fi Menu

The Wi-Fi utility allows you to connect the VS80 with a smart device, see Sec-
tion 12 for complete information. The items listed below provide a basic over-
view of the Wi-Fi menu options:
• Set Wi-Fi ON/OFF.
• View the SSID (Service Set Identifier) number. The SSID is the identifier
for all of the networks currently within range.
• Create a password (up to 16 characters) using the touch-screen keyboard.
Tap the SETTINGS box to open the password menu.

8.2.4 Display Grid (visual cameras only)

Tap ON or OFF to enable or disable the Display Grid. Each block in the grid
represents one square 0.2 in (0.5 cm) area. Tap the unit of measure on the
screen to toggle imperial and metric units.
Figure 8.4 Display Grid. Image on left shows Imperial units selected; Image on right shows
Metric units selected.
The grid is superimposed over the camera image to give dimensional context
to the area under inspection.

8.2.5 Timestamp

Tap ON or OFF to enable or disable the timestamp option. When enabled,
time and date are saved with each image and video.

8.2.6 External Microphone

Tap ON or OFF to enable or disable the external microphone function. Attach
the supplied microphone earpiece to the 3.5 mm connector on the meter's
right side. Use the VOLUME slider to set the microphone input volume from 1
to 10, or press DEFAULT to set the volume to 5. Audio narrative can then be
recorded with each video.
#NAS100101; r. AB/85156/85156; en-US
21