Assembly; Parts Packed Separately In Carton; Removal From The Carton - Craftsman Edger 536.772360 Operator's Manual

Assembly

Parts Packed Separately In Carton

1 - - Owner's Manual (not shown)
1 - - Container Of Oil
2 - - Hair Pin
1 - - Control Rod
Thrown debris can result in foreign
objects being thrown into the eyes,
which can cause severe eye damage.
Always wear safety glasses or eye shields while
you assemble, operate or do maintenance to
the unit.
Figure 1 shows the product completely assembled.
References to the right or left side are from the
viewpoint of the operator's position behind the unit.
Figure 1: Product Completely Assembled
8
WARNING
1 - - Container of Oil

Removal From The Carton

1 Remove the bottle of oil and parts bag from the
carton.
2 Cut down all four corners of the carton.
3 Remove the packing material positioned around
the front and rear of the unit. Leave the packing
material on the bottom of the unit until the control
rod is assembled. This will keep the front wheel in
a stable position.
4 Lift the machine out of the carton and place on a
hard level surface.
1 - - Control Rod
2 - - Hair Pin