Wavetronix Click 301 Using Manual page 13

Once you have finished, use the menu bar at the top of the screen to save your settings, return to the Select
Driver screen, and more.
The Save menu allows you to save your settings. Select Save to File to save your settings to a file. Selecting this
■
will open a directory box, allowing you to name your settings file. This file will always be saved in the Wavetronix
folder created when you installed Click Supervisor, under Wavetronix > ClickHome > Drivers > 301 > User. You
can also select Save to Device to save your settings to your Click 301.
Note. If you do not save your settings to your Click 301, they will be lost the next time you power the device down.
The Tools menu contains five options for working with your device. Reset > System power cycles your device,
■
while Reset > Factory Default restores your device to the settings with which it was shipped. Restore will restore
the driver to the settings currently saved on the Click 301, erasing any unsaved changes. Upgrade can be used
to manually upgrade to the most current firmware for your device. Hex View changes the view of certain settings
in the driver to hexadecimal.
Clicking the Quit menu exits the driver and returns you to the Click Supervisor main page.
■
© 2022 Wavetronix LLC. All rights reserved. Protected in the US by patents viewable at www.wavetronix.com/en/legal. Protected by Canadian Patent Nos. 2461411; 2434756; 2512689; and European Patent Nos. 1435036; 1438702;
1611458. Other US and international patents pending. Wavetronix, SmartSensor, Click, Command and all associated logos are trademarks of Wavetronix LLC. All other product or brand names as they appear are trademarks or
registered trademarks of their respective holders. Product specifications are subject to change without notice. This material is provided for informational purposes only; Wavetronix assumes no liability related to its use.
WX-501-0531 • 01.22 13 of 13