Warnings For Safety And Use - BORETTI CRG916 User Manual

2. Warnings for safety and use

* This manual is an integral part of the appliance. It should be kept
in good condition and close to the appliance for the whole lifecycle
of the cooker. We recommend reading this manual very carefully
before using the cooker. In case an additional jets kit is given as
accessory to the cooker, we recommend keeping and preserving it.
The installation must be carried out by qualified personnel and in
compliance with current standards. This appliance is for domestic
use and conforms to the eec directives currently in force. Use in
a professional setting and installation within a business such as
restaurant, bar, company canteen or any other use other than that
specified here will immediately void the warranty. The appliance is
built for carrying out the following function: cooking and heating
food; any other use is to be considered improper. The manufacturer
declines any responsibility should the appliance be used for
purposes other than those indicated.
* At the moment of purchase, the user assumes direct responsibility
for the product and must therefore make sure that, with normal use,
no instability, deformation, breakage or wear occurs over time that
would reduce product safety.
* This product is designed and manufactured to operate safely and
does not pose any dangers to people, animals, and objects.
* Do not modify this appliance.
* Do not spray aerosols in the vicinity of this appliance while it is in
operation. This appliance shall not be used as a space heater. Not for
use in marine craft, caravans or mobile homes unless each burner is
fitted with a flame safeguard.
* Any transit protection must be removed before use. Do not leave any
pieces of the packing unattended in the home. Separate the various
packing materials and deliver them to the nearest recycling centre.
* The earth connection is obligatory conforming to the modalities
envisaged by the safety standards of the electrical wiring system.
* Should the gas taps be difficult to rotate, lubricate them using a
specific product for high temperatures. Contact the technical service
for this operation.
* Immediately after installation, test the appliance briefly by following
the instructions shown below. In the event of a malfunction,
disconnect the appliance from the mains and contact your nearest
technical service centre. Do not attempt to repair the appliance.
9