Finalizing A Disc (Disc Finalize); 光盘烧结（光盘终结 - Samsung SC-DC173U Owner's Instruction Book

ENGLISH
DVD Camcorder: Disc Manager

Finalizing a Disc (Disc Finalize)

 This function works only in Camera Mode. page 26
 To play the contents of a DVD-RW/-R/+R DL on other DVD Players/
Recorders, you must finalize the disc. When finalizing, there should be
enough power in the batteries. If an the AC Power adapter is to be used,
make sure that the jack is properly connected.
A power cut during finalizing may disrupt the disc from replaying.
1. Set the [Mode] switch to [DISC].
(SC-DC173(U)/DC175/DC575 only)
2. Set the [Power] switch to [
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select
<Disc Manager>, then press the [Joystick].
5. Move the [Joystick] up or down to select
<Disc Finalize>, then press the [Joystick].
6. Move the [Joystick] left or right to select
<Finalize>, then press the [Joystick].
 The message <Finalizing, please wait...>
will appear. When finalizing is complete, the
message <Complete!> will appear.
Warning!
During finalizing, do not cause impact or vibration to
your DVD Camcorder. This could cause a malfunction.
Notes
 The Finalize/Format functions are not available at
battery level and .
 Once finalized, the title scenes or playlists in the
disc cannot be deleted or edited.
 Time required for finalizing may differ by disc type.
 Refer to page 11 for finalized disc compatibility.
 Playback is not guaranteed in all DVD Players/
Recorders. For compatibility details, refer to
your DVD Players/Recorders owner's manual.
 Once the DVD-R/+R DL disc is finalized, you cannot
re-record it in the DVD Camcorder.
 You may play back DVD+RW discs on other devices
without finalizing them.
 You can not make an additional recording on a DVD-
RW disc without unfinalizing it after it is finalized.
80
DVD-RW/-R/+R DL
4
(Camera)].
5
6
Disc Finalize
Disc Name : Science
Finalize
Disc Format
Used Space
Free Space
DVD摄像机:光盘管理器
光盘烧结（光盘终结）
摄像模式
 此功能只适用于
 要在其它 DVD 播放机/录像机上播放 DVD-RW/-R/+R DL 的内容，必须终结光
盘。在烧结时，必须保证电池内有足够的电量。如果使用适配器必须确认插头
完全的连接。在烧结的过程中掉电会因为重新开始而破坏光盘。
Camera Mode
►Disc Manager
Disc Finalize
Disc Unfinalize
Disc Format
Disc Info
Move OK Select MENU Exit
Camera Mode
►Disc Manager
Disc Finalize
Disc Unfinalize
在终结期间，不要使 DVD 摄录机受到碰撞或震动。这可能
Disc Format
会造成故障。
Disc Info
Move OK Select MENU Exit
Rename Back
VR Mode
00:02:20
00:27:40 (SP)
Move OK Select MENU Exit
DVD-RW/-R/+R DL
。26页
1. 设置模式[Mode]选择光盘[DISC]。
(仅限SC-DC173(U)/DC175/DC575)
2. 设置电源[Power]键选择摄录[
3. 按菜单[MENU]键。
 菜单清单就会显示出来。
4. 上下移动摇杆[Joystick]选择<光盘管理器>，然后按
[Joystick]。
5. 上下移动摇杆[Joystick]选择<光盘终结>，然后按
[Joystick]。
6. 左右移动摇杆[Joystick]选择<终结>，然后按
[Joystick]。
 <正在终结，请稍候...>字样显示。当烧结完
成，则显示<完成!>字样。
警告
注意
 电量处于 或 时不可使用格式化/终结功能。
 一旦烧结完成，标题清单和光盘播放清单将不能删除
或编辑。
 烧结所需要的时间由光盘类型决定。
 有关已终结光盘的兼容性信息，请参阅第11页。
 不保证在所有的DVD播放机/刻录器上都能播放。有关
兼容性的详情，请参阅您的DVD播放机/刻录器的使用
手册。

DVD-R/+R DL光盘一旦终结，您不能在DVD摄像机内对
它重新录像。
 您可以在其他设备上播放DVD+RW光盘而无须对它们进
行终结处理。
 若DVD-RW光盘已经终结，您必须在对它进行取消终结
处理后，才能进行附加录像。
中 文
(Camera)]。