Xp25I Controls And Layout - Samson EXPIDETION XP25I Owner's Manual

Battery powered portable pa system
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
1
1.
Loudspeaker -
efficiency paper cone transducer.
2.
Volume/Power Control - This
rotary knob controls the level of
the microphone input and powers
the unit on and off. Turn the control
clockwise to turn the system on.
Turn the knob counter-clockwise
until it clicks to turn the system off.
3.
Power Indicator - RED
LED illuminates indicating the unit
is powered on, ready for operation.
4.
iPod Level - This rotary knob
controls the level of the iPod to the
loudspeaker.
5.
Charge Indicator - The Charge
Indicator flashes GREEN while the
rechargeable battery is charging,
and will light steady GREEN when
the battery is fully charged. The
Charge Indicator will flash RED
when the battery is low and the
unit is power on.
6.
Line Out Jack - 1/8" (3.5mm)
auxiliary Line Output. The
Microphone, iPod and Line In
signals are present at this output.
Owner's Manual
3
5
2
4
6
5" full-range high
XP25i

XP25i Controls and Layout

8
7
9
11
7.
Line In Jack - 1/8" (3.5mm)
auxiliary Line Input for connecting
an external sound source (CD
player, MP3 player, or audio line
output from another device).
8.
DC Power Input - Connect the
supplied AC/DC adaptor to
recharge the battery or to supply
power to the unit.
9.
Microphone Input - 1/4" (6.3mm)
Mic level Input jack. Plug the
supplied Samson PT40M or another
high-impedance microphone into
this input.
10. iPod Compartment - The XP25i
has a built-in iPod dock which can
be used to connect most of the
latest iPod models. The iPod signal
is controlled by the iPod Level
control (#4).
11. Microphone Stand Adaptor
- 5/8" female thread adaptor
for mounting the XP25i onto a
microphone stand.
10
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Expedition xp25i

Table of Contents