Controls And Connections - Samson Expedition XP108W Owner's Manual

Controls and Connections

1. MASTER VOLUME - Used to control the overall level of the speaker system.
2. MASTER TREBLE - Controls the high-frequency tone of the entire system.
3. MASTER BASS - Controls the low-frequency tone of the entire system.
4. CH1 VOLUME - Controls the level of the Channel 1 Mic/Line input.
5. LINE / MIC Switch - Adjusts the gain of the CH1 input for a microphone or line level device.
6. CH1 Input - XLR/1⁄4" input for connecting a microphone or a device with a line level signal.
7. CH2 VOLUME - Controls the level of the Channel 2 Aux input.
8. AUX IN - Connect a line level device using a 1/8" audio cable.
9. LINE OUT - Line level 1/4" output jack to connect the XP108w to the input of a another
XP108w to create a dual mono speaker system. The Line Out is before the MASTER
VOLUME and EQ Controls.
10. CH3 VOLUME - Controls the level of the internal wireless microphone as well as the
optional XPD USB wireless receiver.
11. XPD WIRELESS Input* - Connect the Samson XPD digital wireless USB receiver to this
input. The wireless receiver gets its power from the XP108w, so no additional power
supply is needed. The USB connector supplies 5V 200mA at of power to charge a small
portable USB device like an MP3 player or smartphone.
12. BLUETOOTH® VOLUME - Controls the level of the Bluetooth input.
13. PAIR Button - Press this button to enable pairing mode in order to connect to a
Bluetooth audio device.
XP108w • Portable PA System
1
2
4
5
6
7
8
9
3
12
13
16
17
18
14
15
10
11
19
20
7