WAGNER FINE SPRAY Owner's Manual page 2

S
AFETY
INFORMATION BEFORE OPERATING THE EQUIPMENT
WARNING
HAZARD: EXPLOSION OR FIRE
Solvent and paint fumes can explode or ignite.
Severe injury or property damage can occur.
PREVENTION:
• Provide extensive exhaust and fresh air introduction to keep
the air within the spray area free from accumulation of
flammable vapors.
• Avoid all ignition sources such as static
electric sparks, open flames, pilot lights,
electrical appliances, and hot objects.
Connecting or disconnecting power cords or
working light switches can make sparks.
• Do not smoke in spray area.
• Fire extinguisher must be present and in good working order.
• Place turbine in a well-ventilated area at a maximum distance
from spray area, preferably into a separate, well-ventilated
room. Flammable vapors are often heavier than air. Floor
area must be extremely well-ventilated. The turbine contains
arcing parts that emit sparks and can ignite vapors.
• Follow the material and solvent manufacturer's warnings and
instructions.
• Do not use materials with a flashpoint below 73°F (22.7°C).
Flashpoint is the temperature that a fluid can produce enough
vapors to ignite.
• Plastic can cause static sparks. Never hang plastic to
enclose the spray area. Do not use plastic drop cloths when
spraying flammable materials.
WARNING
HAZARD: EXPLOSION HAZARD DUE TO
INCOMPATIBLE MATERIALS.
Will cause property damage or severe injury.
PREVENTION:
• Do not use materials containing bleach or
chlorine.
• Do not use halogenated hydrocarbon solvents such as
bleach, mildewcide, methylene chloride and 1,1,1--
trichloroethane. They are not compatible with aluminum.
• Contact your coating supplier about the compatibility of
material with aluminum.
English
I
NFORMATION
HAZARD: HAZARDOUS VAPORS
Paints, solvents, insecticides, and other
materials can be harmful if inhaled or come in
contact with the body. Vapors can cause
severe nausea, fainting, or poisoning.
PREVENTION:
HAZARD: GENERAL
Can cause severe injury or property damage.
PREVENTION:
2
•
R S
EAD ALL
WARNING
• Use a respirator or mask if vapors can be
inhaled. Read all instructions supplied with
the mask to be sure it will provide the
necessary protection.
• Wear protective eyewear.
• Wear protective clothing as required by coating manufacturer.
WARNING
• Read all instructions and safety precautions before operating
equipment.
• Follow all appropriate local, state, and national codes
governing ventilation, fire prevention, and operation.
• The United States Government Safety Standards have been
adopted under the Occupational Safety and Health Act
(OSHA). These standards, particularly part 1910 of the
General Standards and part 1926 of the Construction
Standards should be consulted.
• Use only manufacturer authorized parts. User assumes all
risks and liabilities when using parts that do not meet the
minimum specifications and safety devices of the turbine
manufacturer.
• Power cord must be connected to a grounded circuit.
• All hoses, swivels, guns and accessories must be rated at or
above 10 PSI.
• Do not spray outdoors on windy days.
• Wear protective clothing to keep paint off skin and hair.
• Never aim spray gun at any part of the body.
• Hose may become hot and cause skin burn.
• Use only Wagner HVLP hose.
This product is intended for home use.
© 2003 Wagner Spray Tech. All rights reserved.
AFETY