1
2
3
4
5
6
7
8
9
10
3.2.2
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
W A R N I N G S
33
34
35
36
37
3.3
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
DoseAware Base Station Package
55
56
57
58
59
60
All manuals and user guides at all-guides.com
Starting the MCS mounted Base Station
Switch on the X-ray system and the Base Station will automatically switch on.
1
First a Philips start up screen will be displayed for a few seconds and after 30
seconds the system is ready to use.
The Online View will display a maximum of 8 PDMs at a time. Only
PDMs that are in range of the Base Station will be displayed.
The Base Station screen is a touch screen. Operate the Base Station by
tapping buttons and graphs on the screen.
N O T E
PDMs are shown on a first come first serve principle (see "reserved slots menu" in
section "Admin Settings menu" on page 3-12. PDMs that are not shown in the Online
View still measure and store dose data.
Position the Base Station similar to the other monitors in the MCS as much
2
as possible.
•
Do not cover the Base Station to prevent excessive temperatures.
•
Be careful when moving the MCS or other equipment because the Base
Station may stick out and can be hit.
Base Station features
The Base Station offers:
• An Online View (see section "Online view
– view current dose rates
• view current Personal Dose Rate information for several PDMs at a
• access the Walk-Up View by tapping the |Displayed Name| tag
Document version 1.2
time.
button of that PDM in the Online View.
Base Station features
" on page 3-4 where you can:
Using the Base Station
3.3
3-3