Seagull Models Cessna Turbo Skylane 182 Assembly Manual page 23

COWLING
- Please see below pictures.
1.
2.
3.
4.
- Tape the cowl to the fuselage using low-
tack tape.
5.
- Use a drill and drill bit to drill the holes
for the cowl mounting screws. Make sure
the cowl position is correct before drill-
ing each hole.
6.
- Install the muler and muler extension
onto the engine and make the cutout in
the cowl for muler clearance. Connect
the fuel and pressure lines to the carbu-
retor, muler and fuel iler valve. Secure
the cowl to fuselage using the M3x10mm
socket head screws.Putting a small length
of silicon fuel tube under the head of the
screw helps with vibration.
2mm
23