Seagull Models Cessna Turbo Skylane 182 Assembly Manual page 18

Cessna Turbo Skylane 182
33.
34.
35.
INSTALLING THE FUSELAGE SERVOS
Because the size of servos difer, you
may need to adjust the size of the precut
opening in the mount. he notch in the
sides of the mount allow the servo lead to
pass through.
- Install the rubber grommets and brass
collets into all servos. Test it the servos
into the fuselage servo mounts.
18
1.
hrottle servo
- Secure the servos with the screws pro-
vided with your radio system.
2.
Elevator servo
THROTTLE SERVO ARM
INSTALLATION
- Install adjustable servo connector in the
servo arm as same as picture below:
1.
.
Instruction Manual.
Rudder servo
Tail wheel
Elevator servo
hrottle servo
Rudder servo