Additional Resources; Important Notices - KMC Controls FlexStat BAC-19 Series Installation Manual

ADDITIONAL RESOURCES

The latest support files are always available on the
KMC Controls web site (www.kmccontrols.com).
To see all available files, you will need to log-in.
See the BAC-190000 Series FlexStats Data Sheet
for:
• Specifications
• Accessories and replacement parts
See the BAC-19xxxx FlexStat Sequence of Op-
eration and Wiring Guide
• Sample wiring for applications
• Sequences of operation
• Input/output objects and connections
See the BAC-19xxxx FlexStat Application Guide
for:
• Configuration of settings
• Passwords
• Communication options
• Display customization
• Wiring considerations
• CO and DCV information
2
• Restarting options
• Troubleshooting
For additional instructions on custom configura-
tion and programming, see the Help system in the
relevant KMC software tool.
© 2022 KMC Controls, Inc.
BAC-19xxxx FlexStat Installation Guide
for:
Specifications and design subject to change without notice

IMPORTANT NOTICES

NOTE: This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation. A BAC-19xxxx
Class A digital apparatus complies with
Canadian ICES-003.
The material in this document is for information
purposes only. The contents and the product it
describes are subject to change without notice.
KMC Controls, Inc. makes no representations or
warranties with respect to this document. In no
event shall KMC Controls, Inc. be liable for any
damages, direct, or incidental, arising out of or
related to the use of this document.
The KMC logo is a registered trademark of KMC
Controls, Inc. All rights reserved.
TEL: 574.831.5250
FAX: 574.831.5252
EMAIL: info@kmccontrols.com
8
926-019-01C
926-019-02C