Pro-Form TRAINER 9.0 PFTL69921.0 User Manual page 15

14. Orient the Storage Latch (52) as shown. Attach
the Storage Latch to the Left Upright (78) with
two #10 x 3/4" Screws (9). Do not overtighten
the Screws.
15. Tighten the eight indicated Screws (2, 3, 4).
To register your product and activate your
warranty today, go to my.proform.com.
16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex key in a secure
place; the hex key is used to adjust the walking belt (see pages 31 and 32). Note: Extra hardware may be
included.
14
9
52
78
15
2, 3, 4
15
2, 3, 4