Table of Contents
Advertisement
CPI Satcom & Antenna Technologies
CAUTION: During the assembly procedure, the sequence of instructions must
be followed. Do Not Tighten Any Hardware Until Instructed.
Refer to the parts list table and the referenced steps.
Az/El
Positioner
Mast Pipe
Reflector
Hole for
Feed Rod
Hole for
Feed Support
1.2M Ku-BAND Rx/Tx SERIES 1132
STEP 2.
Slip the Az/El Positioner (item 2) onto
the mast pipe as shown.
STEP 3.
Place reflector onto Az\El Positioner
Assembly and secure using the Hi-lo
screws provided.
8
4096-630
Advertisement
Table of Contents
