Table of Contents
Advertisement
CPI Satcom & Antenna Technologies
2.2
FEED SUPPORT ASSEMBLY
NOTE:
These instructions are intended as a general reference for feed
support assembly. If your antenna system has specific feed support
installation instructions, then refer to them at this time.
CAUTION:
ITEM NO.
PART NO.
1
VARIES
2
VARIES
3
8031-008
4
8031-026
5
8201-041
6
8202-041
7
8101-009
During the assembly procedure, the sequence of instructions
must be followed. DO NOT TIGHTEN ANY HARDWARE UNTIL
INSTRUCTED. Refer to the feed support parts list and steps.
FEED SUPPORT PARTS LIST - TABLE 2.2
Feed Rod
Feed Support Tube
5 / 16" x 1.00" Bolt
5 / 16" x 3.25" Bolt
5 / 16" Flatwasher
5 / 16" Lock Washer
5 / 16" Hex Nut
1.2M Ku-BAND Rx/Tx SERIES 1132
DESCRIPTION
9
4096-630
QTY
2
1
3
1
8
4
4
Advertisement
Table of Contents
