Advertisement
EG8247Q
Quick Start
No.
1
2
3
4
5
6
7
8
9
10
11
Issue 03 (2020-02-26)
Item
Description
On/Off
Powers the ONT on or off.
Power
Connects to a power adapter.
TEL1-TEL2
Connects to the ports on a telephone or fax machine.
LAN1-
Connects to PCs or IP set-top boxes (STBs).
LAN4
USB1-USB2
Connects to USB storage devices.
CATV
Connects to a TV.
Optical
The optical port is equipped with a rubber plug and
port
connected to a fiber for upstream transmission.
The type of the optical connector connected to the optical
port can be SC/APC.
Reset
Press the button for a short time to reset the device; or
press the button for a long time (longer than 10s) to
restore the device to the default settings and reset the
device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to
access the Internet. If an ONT cannot access the Internet after a
reset, contact your Internet service provider.
WPS
When the WLAN is on, press the WPS button (> 3s) and
release the button to start Wi-Fi protected setup (WPS)
negotiation.
WLAN
Used to enable or disable the WLAN function
- When the WLAN is disabled, press the WLAN button (>
3s) and release the button to enable the WLAN.
- When the WLAN is enabled, press the WLAN button (> 3s)
and release the button to disable the WLAN.
Light
It is used to turn on/off indicators.
● On: Indicators can be lit properly.
● Off: Indicators are off.
NOTE
You are advised to turn on indicators to identify abnormalities in
time.
Copyright © Huawei Technologies Co., Ltd.
2 Connecting Cables
4
Advertisement
