Mounting To The Bvp-750/750P/950/950P - Sony OHB-730 Installation Manual

Mounting to the Video Camera
Proceed as follows.
1
Remove the red connector cover from the rear of
the CCD unit.
2
Loosen the lens-lock knob, turn the lens lock
counterclockwise, and remove the front cover.
3
Loosen screw A on the front, and open the
insertion-prevention plate.
4
Insert the CCD unit, and secure it with the four
mounting screws B.
Fasten the screws securely with a coin or similar
tool.
5
Turn the mounting lever on the CCD unit fully
counterclockwise, and remove the mounting cap.
6
Turn the mounting lever clockwise to its lowest
position.
7
Close the insertion-prevention plate, and secure it
with the screw A.
Notes
• Be sure to secure the CCD unit firmly and correctly.
Otherwise the unit may be damaged.
• Be sure to fully turn the mounting lever to its lowest
position. Otherwise the lens may be damaged.
• Be sure to close the insertion-prevention plate and fix
it securely. Otherwise the lens cannot be mounted.
4(E)
Mounting to the BVP-750/750P/
950/950P
Figures show mounting the unit to the BVP-750/750P.
It is possible to mount the unit to the BVP-950/950P in
the same way.
Viewfinder horizontal-lock ring
BVP-750/750P
OHB-730/730P/730WS/730WSP
OHB-750A/750AP/750WSA/750WSAP
Mounting screws
BVP-750/750P color video camera and
OHB-730/750A-series CCD unit
Viewfinder stopper
Front plate
Mounting cap
Connector cover
(on the rear)
Mounting lever