Toro Groundsmaster 4500-D Installation Instructions Manual page 21

2. Plug the 9-pin connector of the multi-function
switch harness into the 9-socket connector of
the console harness
1. 9-pin connector
(multi-function switch
harness)
3. Secure the console harness to the steering
column with 2 cable ties.
Installing the Control Cover
1. Align the holes in the control cover to the holes
in the switch mount
1. Switch mount
2. Push-in fastener
2. Using the middle holes, secure the cover to
the mount with 2 push-in fasteners as shown
in Figure 40.
(Figure 39).
Figure 39
2. 9-socket connector
(console harness)
(Figure 40).
Figure 40
3. Control cover
3. Secure the cover to the mount with 4
flange-heads screws (1/4 x 3/4) as shown in
Figure 41.
1. Flange-heads screw (1/4
x 3/4 inch)
g371429
9
Installing the Decal and
Fuse
Parts needed for this procedure:
1 Fuse (2 A)
1 Fuse decal
Procedure
1. Insert the fuse (2 A) into the open fuse block
slot that corresponds to the connector use when
plugging in the connector from the module
(Figure 19
g350789
21
Figure 41
2. Control cover
and Figure 42).
g350771