Orca 500 Operating And Maintenance Instructions Manual page 46

4.0 QUESTIONS FRÉQUENTES
Attention! In any case, always comply with the safety instructions set out in point I.I. at the
beginning of this manual in order to avoid potential mechanical or physical damage..
Observation
All LEDs flash quickly,
with alarm beep
All LEDs flash quickly,
with alarm beep
The 2 WALL+2H LEDs
flash quickly with alarm
beep
The 2 FLOOR+3H LEDs
flash quickly with alarm
beep
The
WALL+FLOOR+2H+3H+3
H LEDs flash quickly with
alarm beep
Possible reason
Overload of the power
supply box
Overload of the power
supply box
Overload of the drive
motor 1
Overload of the drive
motor 2
The cleaner is out of
the water and cannot
restart automatically
46
Solution
Switch off and contact the after-sales
service
Switch off and contact the after-sales
service
Check for foreign objects trapped in the
belts. Otherwise, contact the after-sales
service.
Check for foreign objects trapped in the
belts. Otherwise, contact the after-sales
service.
Put the cleaner back in the water and
restart.