Orca 500 Operating And Maintenance Instructions Manual page 44

MAINTENANCE AND ADJUSTMENT OF POOL CLEANERS
3.0
filter cleaning
3.1
a. Unplug the device.
Remove the device from the water
b.
If the device is in the pool, pull on the cable carefully until you can grab the handle. Use only the
handle (absolutly not the cable) to pull it out of the water and then put the unit down until the
largest amount of water flows out of the unit.
Remove the filters :
c.
Put the cleaner on the ground, press the buttons ( 4-1), the covers unlock (4-2), open the covers (
4-3), and remove the filters ( 4-4).
4-1
4-3
press
4-4
44
4-2