Uniz SLASH 2 PLUS User Manual page 22

5. Turn the arm clockwise to lock.
6. Installation is completed.
Notes
: If it is tight to take off the platform, shake the platform left and right when pull it back.
SANDING BUILD PLATFORM
After the platform has been used for a long time, its surface will become smooth which leads to
poor model adhesion and increases the printing failure rate. To deal with this problem, users need
to sand the platform.
1. Clean the platform surface with alcohol.
2. Grind the surface into a grid shape with the sand sandpaper delivered with the machine.
D USAGE AND MAINTENANCE
16