Uniz SLASH 2 PLUS User Manual page 18

SET WIFI
You could connect the printer with your router via WiFi. Go the SETTINGS menu. Click WiFi button.
Click SSID, there will be a list of available WiFi. Choose the WiFi network and enter password. Click
CONNECT button. When you see the IP address is shown, it means the printer is connected well
with WiFi network. There should be a WiFi icon appearing at right top of this interface.
UPGRATE FIRMWARE OR FACTORY RESET
Enter SETTINGS menu and click SYSTEM button, you will find the SN number. You could scan the
QR coder to get SN number as well.
You could find total working hours of LED, Pump and LCD in this interface, too.
SET PRINTER NICKNAME
Enter SETTINGS menu and click NICKNAME button, you could set your own printer alias here.
C INTERFACE INFORMATION
12