Uniz SLASH 2 PLUS User Manual page 16

RESET Z-AXIS ZERO POSITION AND LEVELING BUILD PLATFORM
If you change for a new Build Platform or the printing model may not stick onto the Platform,
please reset z-axis zero position and leveling the Build platform. You could use an A4 paper and
the Cross Screwdriver sent with your printer. (there is detail instruction in Chapter D)
After leveling, please put the A4 paper under Build Platform and reset again. It finishes if you may
feel the frictional force between Platform and A4 paper.
MOTOR CONTROL
If you want to control Build Platform to move upwards manually, you could enter MOTOR
CONTROL menu. Choose a distance (10/30/50mm) first, and then click the Arrow. Please do not
click too fast and take an eye to watch the distance between Platform and top position.
C INTERFACE INFORMATION
10