Language; System; Device Information; Storage - AEM NETWORK SERVICE ASSISTANT User Manual

NSA
User Manual
e. Language
Select [Language].
•
Select one of the languages available and then
•
save the settings.
•
Select to restart the device or
•
f. System
Select [System] to gain access to information relating
to the device, storage, battery status as well as to
restore the NSA to factory settings.
g. Device Information
• Click [Settings] on the home screen, then [System]
and then [Device Information].
• The screen will show the NSA model, serial
• number, software, hardware, FPGA version, adapter
information and test count.
• Select
Note: Test count is the number of insertion cycles
for the adapter port.
h. Storage
to
to restart later.
[Storage] displays the capacity and used and free
space on the NSA.
i. Battery
•
•
•
•
WWW.AEM-TEST.COM
CUSTOMERCARE@AEM-TEST.COM
VER # : 1.0 / PART # : 2201-0011
8
to exit the screen.
Select [Settings] on the home screen, then [System]
and them [Battery].
User will be brought to a screen showing the
charging status, time remaining, battery voltage,
current battery status and input voltage.
Select to exit the screen.
[Reset Battery Gauge] recalibrate discrepancies in
the battery reading. Use this feature only when the
battery percentage is fluctuating.
Note: i. Ensure that the battery is fully charged 100%
before doing the reset. ii. Select [Reset Battery
Gauge]. iii. NSA will apply the changes and restart
the device. AEM recommends to charge the battery
overnight.