Page 1
TAKACAT Assembly Instructions For GO Series Inflatable Boats www.takacat.com Takacat Owner’s GO Series Manual – 2022...
Page 2
3. Inflation valves 4. Oar rowlocks INTRODUCTION Congratulations on the purchase of your new Takacat! This information sheet is to assist with the assembly, operation and storage of your inflatable boat with safety and enjoyment in mind. International Standards ISO 4892-3:2006 ...
Page 3
Takacat inflatables can be stored either inflated or in a storage case. When stored in a bag, the bag must be dry. Take this opportunity to give your Takacat a good clean. If being left inflated it's best to cover your Takacat. In high temperatures you will need to let some air out of the tubes to avoid over expansion.
Page 4
(its not broken), but it is still working and will continue until the correct psi has been reached. Please do not switch it off at this point. Additional tips & support can be found here: https://www.takacatasia.com/tips-support-manuals www.takacat.com Takacat Owner’s GO Series Manual – 2022...
Need help?
Do you have a question about the GO Series and is the answer not in the manual?
Questions and answers