Floor Installation; Connecting To The Mains; Operation - Hyundai H-HV1-10-UI562 Instruction Manual

8.
1000 W
Fig. 6

Floor installation

1. Carefully remove the heater from the package.
2. Make sure that the parts of the appliance have no remaining crumbles of packing foam plastic
or other debris.
3. Remove the two support legs from the packaging of the convector.
4. Turn the unit so that its bottom was in easy access.
6. Tighten the screws in the existing holes.

5. CONNECTING TO THE MAINS

EN
1. Convector is designed for connection to the plug with single-phase ~220 V, 50 Hz.
technical data of the device.
3. Convector when connected to the plug must comply with applicable electrical codes.
4. Electric outlet must be properly grounded. The receptacle must be rated for at least 10A.
Electrical plug and socket must always be kept dry to prevent electrical leakage. Regularly check
the power cord, check with the hand, whether the plug is not heated.
to poor electrical contact replace the socket with help of a specialist.

6. OPERATION

For models:
H-HV1-10-UI562
H-HV1-15-UI563
H-HV1-20-UI564
1500 W
300
119
WARNING!
The power outlet should be rated at least 10A for models with a
maximum capacity of up to 2000 W and at least 12 A for models with a
maximum capacity of 2500 watt.
2000 W
494
110
Electric convector
600
118