2.
Verify that the Bit Form selection is set to D8, S1, No by pressing SET and
then 0.
•
Figure 2 appears with D8, S1, No blinking. To change the option, press the
SET or ( - ) button until desired option is blinking. Select the blinking
option by pressing JOB.
Bit Form
Select
SET or -
3.
Verify that the Xon/Xoff selection is set to RTS/CTS by pressing SET and then
4.
•
Figure 3 appears with RTS/CTS blinking. To change the option, press the
SET or ( - ) button until desired option is blinking. Select the blinking
option by pressing JOB.
Xon/Xoff
Select
SET or -
4.
Verify that the Format selection is set to Motorola by pressing SET and then 5.
•
Figure 4 appears with Motorola blinking. To change the option, press the
SET or ( - ) button until desired option is blinking. Select the blinking
option by pressing JOB.
Format
Select
SET or -
2
firealarmresources.com
D8 S1 Odd
D8 S1 Evn
> D8 S1 No
D7 S2 Odd
Figure 2
Disable
> RTS/CTS
XON/XOFF
Figure 3
Ex Tekhex
St Tekhex
> Motorola
Intel hex
Figure 4
Need help?
Do you have a question about the Aval PKW1100 and is the answer not in the manual?