Measurements And Adjustments; Electric Adjustment - Panasonic SDR-S100E Service Manual

9 Measurements and Adjustments

9.1.

Electric Adjustment

Even if the MAIN PCB (L), (R) is replaced as a unit, it must be achieved the adjustment and factory setting. The adjustment
in this unit is separated two types as shown below.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-PAVC"
web-site in "TSN System".
• An exclusive jig and PC (including software for adjustment) are necessary for electric adjustment
• Connection method of the main unit and an exclusive adjustment jig as follows
Figure of connection
• Install the EVR jig to PS6002 of Main PCB (L). (Refer to the disassembly procedure)
Figure of image when adjustment
34