Casio EXILIM K860PCM1DMX User Manual page 74

. To shoot using Move Out CS
1.
Compose the image so the subject is within the boundary on the
monitor screen.
2.
Half-press the shutter button.
• The camera will adjust exposure and focus automatically.
3.
When the boundary on the monitor screen
turns green, press the shutter button the rest
of the way down.
At this time the camera will go into recording standby
and start pre-recording images and storing them in a
buffer, in accordance with the Prerecord Time setting
you configured in step 10 under "To setup the
camera" on page 72. After the buffer becomes full, new images keep being added
while older images are continually being deleted.
The camera will start saving images automatically the moment it detects that the
subject has moved out of the boundary.
• "0 AUTO" flashes on the monitor screen during recording standby and auto
recording.
4.
Image recording will continue until the end of the Prerecord Time is
reached.
• While the camera is in Move Out CS recording standby, you can cancel
standby by pressing the shutter button all the way down. You then will be able
to shoot images normally.
• To stop an ongoing image recording operation, press [SET] or [0].
5.
Save the CS images (page 58).
74
Using BEST SHOT