Other Playback Functions (Play); Playing A Slideshow On The Camera - Casio EXILIM K860PCM1DMX User Manual

Other Playback Functions (PLAY)

This section explains menu items that you can use to configure settings and perform
other playback operations.
For information about menu operations, see page 77.
Playing a Slideshow on the Camera (Slideshow)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
Start Starts the slideshow
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All images except
Images
Only: Snapshots only
T
» Only: Movies only
One Image: One single selected image (selected using [4] and [6])
Time from the start to the end of the slideshow
Time
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Amount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or "MAX".
If you specify a value from 1 to 30 seconds, movies play from beginning
Interval
to end.
When the slideshow reaches a movie file while "MAX" is selected, only
the first frame of the movie will displayed.
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change
• Patterns 1 through 4 have different background music, but they all use
the same image change effect.
• Pattern 5 can be used for playback of snapshots only (except for
those that are part of a CS group), and the "Interval" setting is ignored.
• Movies that include audio are played back without BGM. Movies that
Effect do not include audio are played back with BGM.
• The currently selected image change effect setting is disabled
automatically in following cases.
– When playing a slideshow for which "» Only" or "One Image" is
selected for the "Images" setting
– When the interval setting is 1 second or 2 seconds.
– Before and after playback of a movie
– During CS group playback
Off: No image change effect or background music
: All non-continuous shutter (CS) images
Z
effect.
106
Other Playback Functions (PLAY)