Continuous Shutter Precautions - Casio EXILIM K860PCM1DMX User Manual

Always Ask
After continuous shutter shooting is finished, a prompt appears allowing you to
select Normal (Batch) or Select & Save.
Select the save method you want to use and then press [SET].
Save Selected: Saves selected images.
Save All
Cancel Save : Does not save any of the images.
5.
Press [SET] to apply the setting.

Continuous Shutter Precautions

• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for
successive images as well.
• Continuous shutter cannot be used in combination with any of the following.
Movie Mode, some BEST SHOT scenes (Digital Anti Shake, Move Out CS, Move
In CS, Digital Panning)
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• In the Prerecord (Still image) and High-speed CS modes, the flash setting
automatically becomes ? (flash off).
• Zoom is disabled during continuous shutter operations.
• Automatic noise reduction at slow shutter speeds is not performed when shooting
with Bracketing CS.
• When the High-speed CS speed setting is anything other than "AUTO-N", the
maximum number of images per continuous shutter session is limited for Prerecord
(Still image), Flash CS, and Bracketing, even if there is memory card capacity
available to store more images.
High-speed CS speed setting not "AUTO-N"
Prerecord (Still image)
Flash CS with flash
Flash CS with LED light
Bracketing
The number of images will be restricted even further or shooting may be impossible
when remaining memory card capacity is less than the allowable number of images
for a particular CS mode.
• The Flash CS mode switches between the flash and the LED light automatically in
accordance with the CS speed. You cannot switch between the flash and the LED
light manually. In the Flash CS mode, either the flash or the LED light will fire
whenever an image is shot.
C
: Saves all the images.
Up to 60 images
Up to 60 images
Up to 3 to 20 images
Up to 60 images
Up to 5 images
60
Snapshot Tutorial