Table of Contents
Advertisement
Viewing Snapshots
Use the following procedure to view snapshots on the camera's monitor screen.
• For information about how to play back movies, see page 96.
• For information about images recorded using continuous shutter (CS), see page
97.
• For information about high-speed movies, see page 64.
1.
Press [p] (PLAY) to enter
the PLAY mode.
• This will display one of the
snapshots currently stored in
memory.
• Information about the
displayed snapshot also is
included (page 166).
• You also can clear the information to view only the snapshot.
• You can zoom in on the image by sliding the zoom controller towards z (page
101). If you are recording a snapshot that is very important to you, it is
recommended that you zoom the image and check its details after recording it.
2.
Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
• You also can scroll between images using the control dial.
[6]
[4]
[p] (PLAY)
[6]
[4]
21
Control dial
Quick Start Basics
Advertisement
Table of Contents
