Table of Contents
Advertisement
Movie Mode Settings
Your CASIO digital camera has three movie modes,
each of which is described below. Before recording,
rotate the movie mode switch to select the mode that
suits the type of subject you are trying to record.
Use this mode for standard movie recording. This is the mode you normally
should use (page 62).
STD
In this mode, recording is performed with an aspect ratio of 4:3, an image
size of 640
x
quality and image size settings cannot be changed.
Use this mode to record high-definition (Hi-Vision) movies (page 64).
HD
The aspect ratio of movies recorded with this mode is 16:9.
Use this mode to record a high-speed movie at up to 1200 frames per second
(page 65).
HS
The aspect ratio of movies recorded with this mode depends on the movie
recording speed.
• Audio is not recorded in this mode.
Recording a High-definition Movie
1.
Before recording, use the HD movie quality setting to specify the movie
quality (page 87).
The size of the movie image and the maximum movie length will depend on the
quality setting you select.
2.
Set the movie mode switch to [HD].
3.
Record the movie the same way as you would a normal movie (page
62).
Press [0] to start and stop recording.
480 pixels, and a frame rate of 30 frames per second. Image
64
Movie mode switch
Recording Movies
Advertisement
Table of Contents
