Using A Memory Card; To Replace The Memory Card - Casio EXILIM K860PCM1DMX User Manual

. Using Power in Other Countries
• The AC adaptor is designed for operation with any power supply in the range of
100 V to 240 V AC, 50/60 Hz. Note, however, that the shape of the power cord plug
depends on each country or geographic area. Before taking the camera and AC
adaptor along on a trip, check with travel agent about the power supply
requirements in your destination(s).
• Do not connect the AC adaptor to a power supply through a voltage converter or
similar device. Doing so can lead to malfunction.
. Precautions when Using the AC Adaptor
• Connecting the AC adaptor to the camera does not charge the battery.
• Make sure that the camera is turned off before connecting or disconnecting the AC
adaptor.
• If you are connecting the AC adaptor to the camera while it has a battery loaded,
never connect or disconnect the AC adaptor while the camera is turned on.
• The AC adaptor will become warm after long use. This is normal and does not
indicate malfunction.
• Unplug the AC adaptor from the power outlet whenever you are not using it.
• When the AC adaptor is connected to the camera while the battery is loaded, the
AC adaptor power is given priority.
• Use of the AC adaptor to power the camera is recommended when connected to a
computer.
• Never cover the AC adaptor with a blanket, etc. Doing so creates the risk of fire.

Using a Memory Card

See page 16 for information about supported memory cards and how to load a
memory card.

To replace the memory card

Press the memory card and then release it. This will cause it to pop
out of the memory card slot slightly. Pull the card out the rest of the
way and then insert another one.
• Never remove a card from the camera while the back lamp is
flashing green. Doing so can cause the image save operation to
fail and even damage the memory card.
160
Appendix