Table of Contents
Advertisement
Operation
Operating Precautions
Operating Precautions
CAUTION
Electrostatic discharge (ESD), excessive input signals or mechanical shock can
dramatically degrade the performance of the probe. Be sure to observe the following
precautions.
• Never touch the tip of the probe!
• Always hold the probe by the retracted metal sleeve.
• Work at a workstation equipped with an anti-static mat.
• Extend the protective sleeve when not actually taking measurements.
• Wear an anti-static wrist strap and avoid introducing static electricity into the device under test
(DUT) or test setup.
• Make sure the device under test (DUT) is at the same ground potential as the probe.
4-2
Chapter 4
Advertisement
Table of Contents
Troubleshooting
