Reversing Door/Handle - Criterion CUF154WD1W Use & Care Manual

Reversing Door (Option)
Tools Required :
• 5/16"end wrench, Screwdriver
Before reverse door, do not forget to unplug the freezer
Note
•
Open door and lift.
Place door on a non-scratching surface.
2
Remove the door switch and assemble it to the
enclosed COVER HINGE L.
4
Door switch
Remove the sealing gasket from freezer door,
noting orientation during removal.
6
Rotate 180 degrees and reinstall by alighing to
groove and firmly pressing around the perimeter,
from bottom to top.
Make sure gasket is fully
setaed into door
groove.
RZE43@@(EN)_냉동고.indd 9
Disassemble using a wrench and screwdriver.
1
5/16"
Remove the bottom hinge plate and assemble it
on the opposite side.
3
Note the location of washer
Separate the bushing and door stopper andassemble
on the opposite side.
5
Door stopper
Bushing
Assemble using a wrench and screwdriver.
7
9
Washer
2021-02-26 오후 5:33:36